Products > Installation Tools
Driving Cap
This tool is essential for driving our sleeves into the ground. The heavy metal cap is inserted into the sleeve then struck with a sledge hammer until the sleeve is level with the surface. Different sizes are available for our sleeves.
Hand Tying Tool - the original tying tool.
Speed, ease of use, and economy make this tool one of our best sellers. Simply hook the tool through the loops at the end of the wire ties and wind the tie tight.
No cutting or adjustments.
Zip Tie Puller Cutter.
This tool ensures that the fence tie is pulled really tight against the post and the mesh ensuring that the mesh will not slip down the posts.
Simply loop the tie around the pipe & fence, and then feed it into the tool. By squeezing the larger lever, the tie is easily tightened even more so than can be accomplished by hand. When the other smaller lever is depressed, the excess tie end is snipped off.
Stanley Hog Ringer
A terrific time saving tool with a million uses! This ''pistol'' is filled (just like a stapler) with c-shaped stainless steel clips. Then the protruding ''pincher'' end of the device is simultaneously slipped around both a strand of deer fencing and the nylon guide cable, high-tensile wire, or rabbit/groundhog barrier. Just pull the trigger, and the Hog-ringer permanently attaches the fence to the cable. This technique is ideal for large projects where significant amounts of guide cable, high-tensile wire, or vinyl-coated rabbit/groundhog wire are being used.
